Server

This Settings screen enables you to select the actions to be taken by Installation Manager (e.g., install, uninstall) and to specify the machine name and database connection of the COM Server for Regulatory.

Set Up the Server

  1. In the Installation menu, click Server. The Server screen for Regulatory is displayed. Closed

    COM Server Settings

  2. Click Add to add a line to the Settings screen.

  3. Select an appropriate Action. The following Action values are available:

    • None – Performs no action.

    Optional: Click Select All to set the Action field to Install for all components listed on this screen. Click Unselect All to set the Action field to None.

  4. Enter the Machine Name for the component to be installed. This is the machine where the COM server for CampusNexus Student will be installed.

  5. Select the name of a Database for CampusNexus Student. The drop-down list contains all the CampusNexus Student databases configured in the Database settings screen.

    Notes:

    • Only one Server can be installed against one database.
    • Multiple Servers can be installed against different databases.

  6. Click copy icon to copy a line. Edit the copied line as needed.

  7. In the COM Farm field, enter the farm's virtual IP address or DNS name if you have multiple COM servers set up in a server farm with a load-balancing system.

  8. Click Delete icon to delete a selected line.

  9. Click Test to ensure the setup for the corresponding line is correct. If a test on a particular line fails, check all associated fields and click Test again.

    Note: The Test buttons uses the Windows Admin credentials (see Global Settings) to test connectivity to the machine specified in the Machine Name field on the Server screen (this screen).

  10. If all tests pass, click right arrows.